Product Description
BENEPACK Wholesale cosmetic packaging container soft tube oemcosmetic tube
35mm diameter aluminum-plastic tubes are suitable for packaging larger capacity cosmetics, such as face creams, lotions, body lotions, hair conditioners, etc. Here are some examples of cosmetics suitable for packaging in 35mm diameter aluminum-plastic tubes:
Face creams: Face creams usually require larger packaging to meet the needs of long-term use. 35mm diameter aluminum-plastic tubes can accommodate face cream products with larger capacities.
Lotions: Moisturizers usually have a thick texture and require smooth squeezing through a larger diameter tube. 35mm diameter aluminum-plastic tubes can provide a suitable form for convenient squeezing of creams.
Body lotions: Body lotions usually require larger packaging to meet the needs of full-body application. 35mm diameter aluminum-plastic tubes can accommodate body cream products with larger capacities.
Hair conditioners: Hair conditioners generally require larger packaging to meet the needs of long hair care. 35mm diameter aluminum-plastic tubes can accommodate hair conditioner products with larger capacities.
In general, 35mm diameter aluminum-plastic tubes are suitable for packaging cosmetics with larger capacities, especially those that require long-term use. However, the specific suitability depends on factors such as the texture, capacity, and usage habits of the products. It is recommended to communicate with suppliers and make choices based on the characteristics of the products and market demands when selecting packaging.
Specification
| COSMETIC TUBE DESCPIPTION |
| Material |
PE,ABL, PBL,Aluminum Tube |
| Diameter |
Round tube from D13mm to 60mm, OVAL from D25mm to 50mm |
| Layers |
2-layers , 5-layers with EVOH |
| Thickness |
ABL/PBL: 250u ,270u,300u,330u,350u,390u |
| Capacity |
From 3ml to 300ml |
| Shape |
Round/Oval/Super oval |
| Body length |
Adjustable |
| Finish coating |
Glossy,Matt |
| Decoration |
Offset printing/Silk screen printing/Hot stamping/Labeling |
| Caps |
Cap:PP |
| Screw cap/ Flip top cap/Lipstick cap/Pump head cap/Acrylic cap/other special caps |
| MOQ |
5000PCS/Item |
Detailed Photos
How to make PE Tubes?
How to make PE Tubes?
1.1 PULLING TUBES-according to customer requirements, draw out the hose body according to the corresponding pipe diameter and length.
1.2 HEADING ---- according to the customer's matching situation, note the corresponding shoulder.
1.3.1 Offset printing--1-8 color silk screen printing, according to the customer's requirements, determine the glossy and frosted effects.
1.3.2 Silk screen printing, hot stamping and labeling--according to the customer's design draft requirements, complete the silk screen printing, hot stamping and labeling processes.
1.4 Locking or sealing: according to customer requirements, locking or sealing.
1.5 Complete inspection - inspect product quality. Ensure 100% factory quality.
1.6 Packaging - according to the customer's packaging requirements, the packaging leaves the factory.
How to make ABL and PBL tubes?
The aluminum-plastic composite pipe is referred to as Abl. First, the customer needs to determine the material of the sheet. Generally, there are ordinary 270 thin sheets, 350 thick sheets, 390 high-gloss sheets and laser sheets. After selecting the sheets, the printing process is determined. Normal Printing processes are: ordinary offset printing, cold or hot stamping surface, silk screen printing, reverse uv printing. After the printing process is determined, the tube can be made, followed by the column head. Finally, seal the tail or make a screw cap to discharge the box.
How to make Aluminum tubes?
As a traditional packaging method, aluminum
Hose (hereinafter referred to as aluminum tube) packaging is widely used in medicine, food, cosmetics, chemical industry, etc.Here give you a brief introduction to the whole process of aluminum tube manufacturing.
The main process flow of aluminum tube manufacturing is as follows:
Stir-fried slices===>tube flushing===> modification===> annealing===> internal spraying===> primer coating===> printing===> upper cover===> tail glue coating===>inspection===>packaging.
Process Flowchart
Exhibition and Team Building
Buyer Feedback
Certifications
FAQ
Who is YANGZHOU BENEPACK CO.,LTD ?
Benepack is a professional Cosmetic Tube manufacturer ,We produce cosmetic tubes, Airless Pump tube, Aluminum Plastic Laminated Tubes, Plastic Laminated Tubes and High Glossy Laminated Tubes, Aluminum Tubes etc. Tubes can be in One-layer, Two-layers and Five-layers, diameters cover from 13mm to 60mm. Tubes can be in different decoration of offset printing, silkscreen printing, hot stamping, labeling, etc.
What's Benepack minimum order quantity?
Our MOQ is ranging from 5000PCS to 20,000PCS per design based on different decoration and requirements.
What is Benepack tube's lead time?
25-40 working days after details/ samples approval sample and deposit.
Can you make tubes in different materials?
Yes, PE, ABL, HGL, Green PE, PCR will be available.
Can you make different colored squeeze tubes?
Yes, we can any color per your request.
Can you provide some tube packaging samples for quality testing?
Yes, the stock samples are for free.
Have you implemented a Product Security System properly documented?
Yes, Good Manufacturing Practice periodically monitored & Hazard analysis programme.CHEMICALS: systematically manage the raw/packaging material by FIFO system.PHYSICS: cleaning and sanitizing on the manufacturing line once a day.
Are there adequate verification activities such as inspection and testing, to ensure product delivered meets customer requirements?
Yes, IQC for income raw materials process, IPQC during mass production once an hour in each machine process; FQC with random inspect and OQC before shipping.
Audited Supplier 
){kind=link}