Dual Chamber Cosmetic Packaging Plastic Tube 2 in 1 Design

• Certification: CE, ISO
• Feature: PE/Abl/Pbl/Plastic
• Color: Custom Make
• Surface Treatment: Glossy/Matt
• Usage: Cosmetics, Toothpaste, Food, Medicine, Chemical
• Material: Plastic
• Shape: Round, Oval, Flat
• Layers: Two Layers or Five Layers
• Body Color: Glossy/Matt/Transparent/Colored
• Process Printing: Silk-Csreen Printing/Hot Stamping/Labelling
• Tail: Sealed/Unsealed/Animal Shape Tail/Abnormal Tai
• Cap: Screw Cap, Flip Top Cap, Disco Cap, Aireless Pump
• Body Length: Adjusted Within The Range of The Tube Capacity
• Thickness: Abl/Pbl: 250u, 270u, 300u, 330u, 350u, 390u
• Head: High, Lower, Pump, Tip, Lipstick, Oval, Flat
• Transport Package: Inner Tray+PE Bag +Carton
• Specification: D19mm-D50mm
• Trademark: Customized Cosmetic Tube
• Origin: China
• HS Code: 39239000
• Production Capacity: 10000000PCS/Month

Product Description

Product Description

BENEPACK Empty Dual Chamber Plastic Tube

BENEPACK D50MM sub-mother cosmetic tubes for cleasner in 75g+75g
Using cleansers packaged in sub-mother cosmetics tubes is usually for single-purpose products, as the design of the sub-mother tube is mainly for convenient dosage control and to maintain product hygiene and freshness. If you want to combine two different types of cleansers, it is recommended to choose separate packaging or mixed usage.

1. Separate packaging: You can purchase two different types of cleansers with different effects and pack them separately in sub-mother cosmetics tubes, and use them as needed. This way, you can maintain the purity and effectiveness of both cleansers, avoiding possible chemical reactions or reduced effectiveness when mixed.

2. Mixed usage: If you want to combine the effects of two cleansers, you can squeeze out a certain proportion of each and mix them evenly in your palm before use. However, it is important to note that the ingredients and formulas of different cleansers may interact with each other, leading to adverse reactions or reduced effectiveness. Therefore, it is best to conduct a small patch test before mixed usage to ensure there is no discomfort or allergic reaction.

In summary, cleansers packaged in sub-mother cosmetics tubes are usually single-purpose products. If you want to combine two different types of cleansers, it is recommended to choose separate packaging or mixed usage, and be aware of possible interactions and adverse reactions. It is advisable to consult professionals or read product instructions before use to ensure proper usage and achieve optimal results.]

                                                        Specification

COSMETIC TUBE DESCPIPTION
Material	PE,ABL, PBL,Aluminum Tube
Diameter	Round tube from D13mm to 60mm, OVAL from D25mm to 50mm
Layers	2-layers , 5-layers with EVOH
Thickness	ABL/PBL: 250u ,270u,300u,330u,350u,390u
Capacity	From 3ml to 300ml
Shape	Round/Oval/Super oval
Body length	Adjustable
Finish coating	Glossy,Matt
Decoration	Offset printing/Silk screen printing/Hot stamping/Labeling
Caps	Cap:PP
	Screw cap/ Flip top cap/Lipstick cap/Pump head cap/Acrylic cap/other special caps
MOQ	5000PCS/Item

Detailed Photos

 

 

                                         

How to make PE Tubes?

 How to make PE Tubes?

1.1  PULLING TUBES-according to customer requirements, draw out the hose body according to the corresponding pipe diameter and length.
1.2  HEADING ---- according to the customer's matching situation, note the corresponding shoulder.
1.3.1  Offset printing--1-8 color silk screen printing, according to the customer's requirements, determine the glossy and frosted effects.
1.3.2  Silk screen printing, hot stamping and labeling--according to the customer's design draft requirements, complete the silk screen printing, hot    stamping and labeling processes.
1.4  Locking or sealing: according to customer requirements, locking or sealing.
1.5  Complete inspection - inspect product quality. Ensure 100% factory quality.
1.6  Packaging - according to the customer's packaging requirements, the packaging leaves the factory.







How to make ABL and PBL tubes?
The aluminum-plastic composite pipe is referred to as Abl. First, the customer needs to determine the material of the sheet. Generally, there are ordinary 270 thin sheets, 350 thick sheets, 390 high-gloss sheets and laser sheets. After selecting the sheets, the printing process is determined. Normal Printing processes are: ordinary offset printing, cold or hot stamping surface, silk screen printing, reverse uv printing. After the printing process is determined, the tube can be made, followed by the column head. Finally, seal the tail or make a screw cap to discharge the box.


How to make Aluminum tubes?
As a traditional packaging method, aluminum
Hose (hereinafter referred to as aluminum tube) packaging is widely used in medicine, food, cosmetics, chemical industry, etc.Here give you a brief introduction to the whole process of aluminum tube manufacturing.
The main process flow of aluminum tube manufacturing is as follows:
Stir-fried slices===>tube flushing===> modification===> annealing===> internal spraying===> primer coating===> printing===> upper cover===> tail glue coating===>inspection===>packaging.











                                                                                                         

Process Flowchart

                                                                         

Exhibition and Team Building

                                                           

Buyer Feedback

   

Certifications

                                                                          

FAQ

Who is YANGZHOU BENEPACK CO.,LTD ?
Benepack is a professional Cosmetic Tube manufacturer ,We produce cosmetic tubes, Airless Pump tube, Aluminum Plastic Laminated Tubes, Plastic Laminated Tubes and High Glossy Laminated Tubes, Aluminum Tubes etc. Tubes can be in One-layer, Two-layers and Five-layers, diameters cover from 13mm to 60mm. Tubes can be in different decoration of offset printing, silkscreen printing, hot stamping, labeling, etc.
What's Benepack minimum order quantity?
Our MOQ is ranging from 5000PCS to 20,000PCS per design based on different decoration and requirements.
What is Benepack tube's lead time?
25-40 working days after details/ samples approval sample and deposit.
Can you make tubes in different materials?
Yes, PE, ABL, HGL, Green PE, PCR will be available. 
Can you make different colored squeeze tubes?
Yes, we can any color per your request.
Can you provide some tube packaging samples for quality testing?
Yes, the stock samples are for free.
Have you implemented a Product Security System properly documented?     
Yes, Good Manufacturing Practice periodically monitored & Hazard analysis programme.CHEMICALS: systematically manage the raw/packaging material by FIFO system.PHYSICS: cleaning and sanitizing on the manufacturing line once a day.
Are there adequate verification activities such as inspection and testing, to ensure product delivered meets customer requirements?
Yes, IQC for income raw materials process, IPQC during mass production once an hour in each machine process; FQC with random inspect and OQC before shipping.