Product Description
25ml Plastic Packaging Flat Tube for Pre-make Up Spf25 30 Sunscreen Cream BENEPACK
The slim 25 level cylinder is a typical bundling structure, reasonable for bundling pre-cosmetics SPF25. Here is a potential plan arrangement:
Tube material: The thin 25 level cylinder is normally made of plastic materials like PE (polyethylene). This material has great fixing and synthetic obstruction, which can safeguard the quality and soundness of the pre-cosmetics.
Limit naming: The level cylinder as a rule has limit marking to permit clients to know the limit of the pre-cosmetics in the cylinder plainly. Normal limits incorporate 15ml, 30ml, and so on, which can be tweaked by the item's necessities.
SPF naming: The level cylinder can likewise be marked with SPF (Sun Insurance Variable) worth to show the sun security capacity of the pre-cosmetics. SPF25 demonstrates that the item has medium sun insurance capacity and can really shield the skin from UV harm.
Advantageous to convey: The thin 25 level cylinder is intended to be lightweight and simple to convey, permitting clients to utilize the pre-cosmetics whenever, anyplace. The cylinder is normally furnished with a little spout or crush mouth, and clients can deliver the proper measure of pre-cosmetics by pressing the cylinder or squeezing the spout.
Fixing: The level cylinder configuration has great fixing, which can really forestall spillage or pollution of the pre-cosmetics. This is vital for keeping up with the quality and dependability of the item.
The thin 25 level cylinder is a typical bundling structure for pre-cosmetics, giving helpful use and proper sun security. This plan arrangement can be tweaked by the qualities and requirements of the item, giving a superior bundling solution.
Specification
| COSMETIC TUBE DESCPIPTION |
| Material |
PE,ABL, PBL,Aluminum Tube |
| Diameter |
Round tube from D16mm to 60mm, OVAL from D25mm to 50mm |
| Layers |
2-layers , 5-layers with EVOH |
| Thickness |
ABL/PBL: 250u ,270u,300u,330u,350u,390u |
| Capacity |
From 3ml to 300ml |
| Shape |
Round/Oval/Super oval |
| Body length |
Adjustable |
| Finish coating |
Glossy,Matt |
| Decoration |
Offset printing/Silk screen printing/Hot stamping/Labeling |
| Caps |
Cap:PP |
| Screw cap/ Flip top cap/Lipstick cap/Pump head cap/Acrylic cap/other special caps |
| MOQ |
5000PCS/Item |
Detailed Photos
How to make PE Tubes?
How to make PE Tubes?
1.1 PULLING TUBES-according to customer requirements, draw out the hose body according to the corresponding pipe diameter and length.
1.2 HEADING ---- according to the customer's matching situation, note the corresponding shoulder.
1.3.1 Offset printing--1-8 color silk screen printing, according to the customer's requirements, determine the glossy and frosted effects.
1.3.2 Silk screen printing, hot stamping and labeling--according to the customer's design draft requirements, complete the silk screen printing, hot stamping and labeling processes.
1.4 Locking or sealing: according to customer requirements, locking or sealing.
1.5 Complete inspection - inspect product quality. Ensure 100% factory quality.
1.6 Packaging - according to the customer's packaging requirements, the packaging leaves the factory.
How to make ABL and PBL tubes?
The aluminum-plastic composite pipe is referred to as Abl. First, the customer needs to determine the material of the sheet. Generally, there are ordinary 270 thin sheets, 350 thick sheets, 390 high-gloss sheets and laser sheets. After selecting the sheets, the printing process is determined. Normal Printing processes are: ordinary offset printing, cold or hot stamping surface, silk screen printing, reverse uv printing. After the printing process is determined, the tube can be made, followed by the column head. Finally, seal the tail or make a screw cap to discharge the box.
How to make Aluminum tubes?
As a traditional packaging method, aluminum
Hose (hereinafter referred to as aluminum tube) packaging is widely used in medicine, food, cosmetics, chemical industry, etc.Here give you a brief introduction to the whole process of aluminum tube manufacturing.
The main process flow of aluminum tube manufacturing is as follows:
Stir-fried slices===>tube flushing===> modification===> annealing===> internal spraying===> primer coating===> printing===> upper cover===> tail glue coating===>inspection===>packaging.
Process Flowchart
Exhibition and Team Building
Buyer Feedback
Certifications
FAQ
Who is YANGZHOU BENEPACK CO.,LTD ?
Benepack is a professional Cosmetic Tube manufacturer ,We produce cosmetic tubes, Airless Pump tube, Aluminum Plastic Laminated Tubes, Plastic Laminated Tubes and High Glossy Laminated Tubes, Aluminum Tubes etc. Tubes can be in One-layer, Two-layers and Five-layers, diameters cover from 13mm to 60mm. Tubes can be in different decoration of offset printing, silkscreen printing, hot stamping, labeling, etc.
What's Benepack minimum order quantity?
Our MOQ is ranging from 5000PCS to 20,000PCS per design based on different decoration and requirements.
What is Benepack tube's lead time?
25-40 working days after details/ samples approval sample and deposit.
Can you make tubes in different materials?
Yes, PE, ABL, HGL, Green PE, PCR will be available.
Can you make different colored squeeze tubes?
Yes, we can any color per your request.
Can you provide some tube packaging samples for quality testing?
Yes, the stock samples are for free.
Have you implemented a Product Security System properly documented?
Yes, Good Manufacturing Practice periodically monitored & Hazard analysis programme.CHEMICALS: systematically manage the raw/packaging material by FIFO system.PHYSICS: cleaning and sanitizing on the manufacturing line once a day.
Are there adequate verification activities such as inspection and testing, to ensure product delivered meets customer requirements?
Yes, IQC for income raw materials process, IPQC during mass production once an hour in each machine process; FQC with random inspect and OQC before shipping.
Audited Supplier 
){kind=link}
){kind=link}